760 L6-2383cc 2.4L DSL Turbo D24T (1983)
Tighten camshaft front sprocket
Use 5199 to prevent sprocket from turning. Make sure that camshaft does not turn.
Torque center bolt to 45 Nm (33 ft lbs).
Remove gauge 5190 and feeler gauge
Disconnect cold start device
Slacken screw 1. Push lever forward and rotate sleeve 900. Note Do not turn screw 2 otherwise it will be necessary to remove cold start device and
reset it on a test bench.
Basic-set injection pump
Slacken pump mounting bolts (Allen key = 6 mm). Align marks in pump and mounting bracket by turning pump. Retighten mounting bolts.