volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Engine - Poor Idle Quality|Page 1216 > < Engine - Poor Idle Quality|Page 1214
Page 5
background image

Ground the test point for the CIS system.

Test point located at firewall on MY 1983, on right hand wheel housing on MY 1984 and later (as illustrated).

Basic setting throttle plate

Do not touch screw (1). Should remain in bottom position.

Remove the orange wire from micro switch.

-

adjust engine speed to 650 rpm by turning the lower adjustment screw on the throttle plate lever.

-

adjust adjustment screw for micro switch.

-

then adjust speed to 750 rpm with screw (1)

Engine - Poor Idle Quality|Page 1216 > < Engine - Poor Idle Quality|Page 1214