760 V6-2849cc 2.8L SOHC B28F (1983)
Alignment: Service and Repair
Caster Adjustment
Caster angle can be adjusted by replacing control arm strut.
-
A shorter strut reduces caster angle by 0.8°, and a longer strut increases caster angle by 0.8°.
Length of Struts are:
Standard:
390.5 mm (15.4 in)
Short:
385.0 mm (15.2 in)
Long:
396.0 mm (15.6 in).
NOTE: The struts are 5.5 mm (0.22 in) longer than they were. This gives a larger caster angle which means a greater self-centering effect.
If the caster is +3°, upper mount has been installed upside down.
-
Remove locking nuts and turn it to correct position.
-
After adjusting caster angle, toe-in must be adjusted to specified value.
NOTE: The illustration shows an earlier variant of suspension tower (up to 1984).