780 V6-2849cc 2.8L SOHC B280F (1987)
Install right camshaft chain and sprocket
-
Place chain on camshaft sprocket with line on sprocket between the two lines on chain.
-
Place chain on crankshaft sprocket so that line on chain corresponds with line on sprocket.
-
Tighten chain on pulling side (the side which is next to the straight vibration damper).
-
Install camshaft sprocket so that pin on sprocket fits into groove on camshaft. If necessary, turn crankshaft somewhat.
-
Install centre bolt.
Install on right side:
-
curved vibration damper. Use locking compound (PIN 1161 053-2) on bolts.
-
New strainer in cylinder block.
-
Chain tensioner.
-
Straight vibration damper
Tighten right camshaft centre bolt
-
Torque to 70-90 Nm (51-66 ft lb). Brace with screwdriver.
-
Left camshaft bolt is tightened later.