850 L5-2.3L Turbo VIN 57 B5234FT (1994)
Cylinder Head Gasket: Specifications
Tightening Specifications
Tighten Lower Cylinder Head Bolts In Three Stages Working Outwards From Center:
1st Stage ............................................................................................................................................................................................. 20 Nm (15 ft lb)
2nd Stage ............................................................................................................................................................................................ 60 Nm (44 ft lb)
3rd Stage .............................................................................................................................................................................. Turn An Additional 130°
NOTE: Use angle gauge tool No. 951 2050, or equivalent
Tighten Upper Cylinder Head Bolts Working Outwards From Center:
Tighten to ........................................................................................................................................................................................... 17 Nm (13 ft lb)
NOTE:
-
Apply liquid gasket part No. 1 161 059-9, or equivalent, on the upper half of the cylinder head, use roller.
-
Take care not to get gasket compound in oil ways.
-
A thin coating is sufficient for a seal.
-
Lock front of camshaft with holder tool No. 999 5453 and rear with locking tool No. 999 5452, or equivalent (without extension pieces).
-
Locate upper half of cylinder head, then pull down towards cylinder head with press tools 999 5454, or equivalent (2).