850 L5-2.4L VIN 55 B5254S (1993)
A mounting hole has been added in the lower section of the protective guard, see shadowed section of illustration.
Install:
-
the protective guard
-
snug bolts
-
Tighten upper bolt, arrowed in illustration, to torque 25 +/- Nm (18 +/- 3 ft.lbs).
-
Tighten other bolts to the same torque setting.
OLDER TYPE
BELT TENSIONER
This section describes 2 types of belt tensioner.
A5
E-TYPE
Belt tensioner with key grip (1) (tour-edged hole) on the belt tensioner upper end.
Used on all 1993 models and on 1994 models with manual transmission. Requires service (greasing) at 50,000 km (30,000 miles) intervals. Reference
SB 26-801 dated Sept. 1992.
A6
F-TYPE