volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 3757 > < Diagram Information and Instructions|Page 3755
Page 2
background image

-

Protect radiator with shield, P/N 9995474.

Remove Hoses and Connections
^

Remove / disconnect:
-

Idle Air Control (IAC) Valve and Throttle Position (TP) Potentiometer connectors.

-

Crankcase ventilation and carbon filter (EVAP canister) hoses.

-

Hoses to brake servo and intake manifold vacuum servo.

-

Inlet hose.

-

EGR temperature sensor. Disconnect sensor from clip.

-

Injector wiring clip.

Remove Intake Manifold
^

Remove / disconnect:
-

Intake manifold upper bolts (three).

-

Oil dipstick and bracket from intake manifold.

-

Intake manifold lower bolts.

-

Gas recirculation pipe from EGR valve.

-

Intake manifold support bracket bolt.

-

Intake manifold, by lifting slightly (approx. 20 mm) to free from engine.

Remove Knock Sensor
^

Remove / disconnect:
-

Knock sensor connector.

-

Knock sensor.

Install New Sensor

Diagram Information and Instructions|Page 3757 > < Diagram Information and Instructions|Page 3755