850 T-5 L5-2.3L Turbo VIN 58 B5234T5 (1997)
Adjust the sun roof mechanism. Adjust rivet center against the slide radius see illustration.
NOTE! Not normally necessary if the sun root is closed when the old gear housing is removed and the new gear housing is installed with the sun
roof closed.
Adjusting gear housing
The gear housing must be locked before it is installed.
Do this by carefully turning the crank until the lock engages.
The crank can be turned left or right, see illustration.
NOTE! Before screwing the crank into place, position the spring in the gear housing as illustrated.
Install gear housing