850 T-5 L5-2.3L Turbo VIN 58 B5234T5 (1997)
-
Remove soundproofing.
-
Remove glove compartment (on passenger side). Refer to "Blower Motor Replacement". See: Blower Motor/Service and Repair
3. Undo connector:
-
Disconnect connector from damper motor.
-
Hold catches in on both sides and pull straight out.
4. Remove damper motor:
-
Undo the screws (3) holding the damper motor.
-
Remove damper motor from damper shaft.
NOTE: Ventilation damper motors have a geared segment fitted to the output shaft, with a matching geared segment on the damper shaft. See
Image.
-
To replace recirculation damper motor, see "Evaporator Core Replacement". See: Evaporator Core/Service and Repair
5. Install:
-
Damper motor (3 screws).
-
Connector.
-
Sound insulation.
-
Glove compartment (on passenger side).
-
Carry out self-adjustment of damper motor limit positions. For more information refer to "Fault Tracing Diagnostic System, On-board
Diagnostic Unit and Test Modes". See: Testing and Inspection/Initial Inspection and Diagnostic Overview