volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Recall - Seat Heater Cable Harness Defect|Page 4292 > < Recall - Seat Heater Cable Harness Defect|Page 4290
Page 4
background image

Screw the electronic thermostat into place on the clip.

Note!

Ensure that the existing cable is not trapped.

Manual seat:

9

Connecting the electronic thermostat (TCU-T) to the car cable harness

Connect the 6-pin connector (with 2 cables) from the new cable harness to the existing connector (1) on bottom of the bracket.

Install the new 6-pin connector (2) from the thermostatic relay to top of the bracket.

Manual seat:

10

Connection to the new 6-pin connector

Connect the car cable harness to the new 6-pin connector (2).

Power seat:

11 

Connecting the electronic thermostat (TCU-T) to the car cable harness

Connect the 6-pin connector (with 2 cables) from the new cable harness to the existing connector (1).

Install the 6-pin connector (2) and mounting on the bracket for the connectors in the same place as the connector (2), which was moved.

Power seat:

12

Connecting to the new 6-pin connector

Recall - Seat Heater Cable Harness Defect|Page 4292 > < Recall - Seat Heater Cable Harness Defect|Page 4290