850 T-5 L5-2.3L Turbo VIN 58 B5234T5 (1997)
Remove:
-
seat belt from seat mounting (1 x 12 mm screw).
-
seat belt tensioner from 'B' post (1 x Torx 30).
-
seat belt (inertia) reel from "B" post (2 x 14 mm screw).
WARNING: The seat belt tensioner must never be taken apart, repaired or moved to another vehicle. Follow instructions on handling a
replaced seat belt tensioner. See: Air Bag Systems/Service Precautions/Technician Safety Information
Installing Seat Belt Tensioner And Seat Belt
WARNING: Under no circumstances use an ohmmeter or other live measuring instrument to take readings on a disconnected non-deployed
pyrotechnical seat belt tensioner. This could deploy the seat belt tensioner.
Install:
-
seat belt to seat mounting (1 x 12 mm screw).
-
Seat belt tightening torque = 40 Nm (30 ft. lbs.).
-
seat belt (inertia) reel to "B" post (2 x 14 mm screw).
-
Seat belt (inertia) reel tightening torque = 40 Nm (30 ft. lbs.).
-
seat belt tensioner to "B" post (1 x Torx 30).
-
Seat belt tensioner tightening torque = 6 Nm (4.5 ft. lbs.).
Installing Seat Belt Tensioner Connector
WARNING: The battery should not be connected when SRS ignition cable igniter connector is removed or installed.