850 T-5 L5-2.3L Turbo VIN 58 B5234T5 (1997)
Power Steering Pump: Testing and Inspection
Tool Required
^
999 5055 Test Instrument
^
999 5175 Coupling
^
999 5319 Coupling
^
998 8695 SRS Tool
^
999 8081 Torque Wrench
NOTE: Car must be lowered when carrying out procedure.
1. Place paper over generator to protect unit from fluid.
2. Extract fluid from reservoir by suction.
3. Connect test instrument. Connect instrument between pump and steering gear pressure hose. Use couplings. Use hollow screw and washers from
coupling to connect coupling.
NOTE: Connect hose between instrument cock and steering gear pressure hose. Cock should be installed with handle in line with hose.
4. Position pressure gauge in engine compartment so that it can be read from driver's seat.
5. Top up fluid level in reservoir:
a. Remove paper over generator.
b. Start engine and allow to idle. Top up fluid according as level drops. Cease topping-up when fluid stabilizes at correct level.
6. Stop engine.
