850 T-5 L5-2.3L Turbo VIN 58 B5234T5 (1997)
9. Attach ABS sensor wire to strut and brake pipe bracket.
10. Secure ABS wire. Clip excess length of ABS wire (if any) on driver's side of engine compartment to brake power booster (brake servo) vacuum
hose. Clip excess length on passenger side to wiring duct at suspension strut tower.
11. Remove support.
12. Mount wheel. Lubricate wheel locating pin on hub with anti-rust agent, P/N 1161030-0. Tighten studs lightly, then tighten in diagonal order to 110
Nm (81 ft. lbs.).
