850 T-5 L5-2.3L Turbo VIN 58 B5234T5 (1997)
3. Removal
-
Detach throttle cable from Accelerator Pedal (AP)
-
Free the latch lugs that hold the kickdown switch in place by pushing a screwdriver into the opening in cowl-panel.
Push out switch with throttle cable.
-
From the engine compartment side, make sure no remnants of the latch lugs remain between the insulation and cowl-panel.
4. Reinstallation
-
Installation of new throttle cable/kickdown switch
-
Ensure that connector is correctly positioned upright.
-
Make sure latch lugs engage cowl-panel.
5. Reattach throttle cable to AP
-
Make sure rubber cushion is in place in the hole on AP.
-
Use retainer in AP to fasten cable.
Make sure bead on the end of cable is anchored at the bottom of the retainer.
-
Cars with SRS:
Replace knee bolster, tighten to: 20 Nm.
Reinstall sound insulation pad