850 T-5 L5-2.3L Turbo VIN 58 B5234T5 (1997)
Shift Lever Housing: Service and Repair
Shift Lever Housing
1. Preparation
-
Remove:
Negative battery lead
Center console as per steps 3 and 4 of Shift Cable A/T replacement. See: Shift Linkage/Shift Cable/Service and Repair
Gear shift knob as per steps 1 and 2 of replacement. See:
-
Release transmission cable from gear lever mechanism
-
Use flat-nosed pliers to remove cable pin.
-
Remove retaining clip securing cable sleeve to selector housing.
-
Remove lamp holder from light molding.
2. Removal of connector (only cars with shift lock).
-
Open solenoid connector.
3. Removal of key lock cable (only cars with key lock).
-
Move gear shift lever to position P and turn ignition key to position I or II.
-
Release key lock cable from adjustment point and locking plate in gear selector housing.