850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
Seat Heater: Service and Repair
Replacing Backrest Heater Pad
REPLACING BACKREST HEATER PAD
Fold the backrest backward as far as possible.
Clamps (use cutting flippers) on the outside and on the inside between the upholstery and padding.
Do not cut more clamps than are necessary to replace the heater pad.
Disconnect heater pad connector.
Remove upholstery. See: Service and Repair/Without Power Seat/Replacing Upholstery/Replacing Backrest Upholstery
Pull off heater pad.
Install in reverse order.
Install the new heater pad.
Start securing clamps in the middle of the backrest between the upholstery and padding.
Use special pliers P/N 1158962-9 to secure the clamps.