850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
4. Timing belt removal:
-
Remove upper tensioner screw.
-
Undo the lower screw.
-
Turn tensioner to free pulley.
-
Remove:
lower screw
tensioner
upper timing cover
timing belt
5. Check tensioner and idler pulleys:
-
Spin the pulleys and listen for noise in the bearings.
-
Check that the tensioner pulley actuator arm has not seized in its bearing. Check the idler pulley and tensioner pulley are tightened correctly.
-
Tensioner pulley, tighten to: 30 Nm (22 ft lb)
-
Idler pulley, tighten to: 24 Nm (18 ft lb)
6. Lock tensioner:
-
Inspect for signs of leakage.
-
Compress tensioner with tool 939 5456, or equivalent. Place tensioner and tighten center nut fully. Wait until the tensioner is compressed and
install lock pin (0 2 mm) in the piston.
NOTE: Replace tensioner if leaks are observed, if there is no resistance to compression or if the tensioner cannot be compressed.