850 T-5R L5-2.3L Turbo VIN 58 B5234T5 (1995)
-
Remove protective cap from bleed nipple and connect hose from collecting bottle.
[LK5]
-
Open bleed nipple and close it again when no further air bubbles are visible in the emerging fluid.
-
Tighten bleed nipple.
-
Remove hose from bleed nipple and install protective cap again.
[LK6]
-
Continue bleed as per LK3-LK6 in the following order:
-
the other rear wheel
-
RH front wheel
-
LH front wheel.
Checking [LK7]
-
Remove bleed unit connector from brake fluid reservoir.
-
Check if there is any air left in the system by depressing brake pedal as if braking sharply.
-
With engine off and brake pedal depressed 3-4 times, pedal travel should not exceed 40 mm (1.57").
[LK8]
-
If pedal travel exceeds 40 mm (1.57"), bleed again and check pedal travel once more.
-
Check that fluid level is not over MAX mark.
-
Let car down.