850 Turbo L5-2.3L Turbo VIN 57 B5234FT (1996)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
-
Drain off enough coolant so that there is none left in the expansion tank.
-
Remove thermostat housing (2 TORX 40 screws).
-
Disconnect sensor.
-
Disconnect terminal pins from connector (see Image) in order to thread the wiring through a ring wrench.
-
Remove temperature sensor and replace.
-
Test sensor.
-
Reinstall in reverse order.
NOTE: Do not forget to top up coolant. Then run engine to normal operating temperature and check coolant level.
