940 L4-2.3L SOHC VIN 88 B230F (1992)
- Control module must be replaced if faulty.
- Free control module from mounting bracket by depressing catch on protective cover with screw-driver.
- Install and connect new control module, ensuring that locking catch is securely engaged.
Inspection 5-Door Models
CHECKING CONTROL MODULE ON 5-DOOR MODELS (700/900) FOR MOISTURE DAMAGE TO PRINTED CIRCUIT BOARD
On 5-door models, the control module printed circuit board may, in certain cases, be damaged by moisture due to the accumulation of water in the
protective housing.
- Disconnect control module connector by depressing the spring catch and pulling the connector upward.
- Remove housing cover and printed circuit board.
- Inspect board for visible signs of moisture damage. If board is damaged, control module, p/n 3533347-5, must be replaced.
DRAINAGE OF PROTECTIVE HOUSING ON 5-DOOR MODELS (700/900)
To prevent recurrence of damage to the control module due to moisture, the protective housing should be drained in the course of all work on the electric
antenna in 5-door models, when installing a new antenna or when replacing the control module or complete antenna.
