940 L4-2.3L SOHC VIN 88 B230F (1992)
The illustrations show
a loose clip (A)
and a securely tightened clip (B).
760/960 with PUR-bonded windshield
Place protection between tool and glass. Insert tool under moulding at each clip position and feel if clips can be moved a millimeter or so side to side. If
clips can all be moved, press each clip to side in "counterclockwise" direction (see illus. arrows) to seat them firmly against body. (Illustration shows
outside of windshield as viewed from the front.)
If a clip cannot be moved in either direction, it has probably adhered to PUR adhesive. In this case, the moulding must be removed and all clips replaced.
Moulding removal
