940 L4-2.3L SOHC VIN 88 B230F (1992)
Brake Caliper: Service and Repair
Replacement
Front
REMOVAL
1. Jack up and support front of car. Remove wheels. Place support stands under jacking points. Mark wheel positions if locating studs are not fitted.
2. Clean caliper of sand and grit. Open bleeding nipple. Collect any brake fluid which escapes.
3. Lock brake pedal in depressed position. Use pedal clamp.
4. Free ABS lead from brake hose. Clean connection between brake hose and brake pipe. Disconnect hose from pipe in wheel housing.
5. Remove brake pads. Remove bolts securing caliper to suspension strut and caliper.
INSTALLATION