Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


940 L4-2.3L SOHC VIN 88 B230F (1992)

Engine, Cooling and Exhaust > Cooling System > Coolant Pump <--> [Water Pump] > Component Information > Technical Service Bulletins > Coolant Pump - Bleed Hole Cleaning > Page 4049

Page 2
background image

Remove:

-

condensation reservoir from underside of coolant pump, first down and then forward using a screwdriver.

-

green residue from bleed hole on the top and underside of the coolant pump using a small screwdriver.

-

clean with paper wipes and water.

Install:

-

pulley.

-

drive belt (loosely).

-

tension drive belt (when the belt is correctly tensioned it should be possible to press it down 5 - 10 mm (3/16" - 3/8") with your thumb).

WARRANTY STATEMENT: Claims may be submitted under the New Car Limited Warranty when a manufacturing defect is present using claim type:
01

Operation No.

Labor description

Time allowance

26911-2

Cleaning bleed hole in coolant pump

0.4 hr

Engine, Cooling and Exhaust > Cooling System > Coolant Pump <--> [Water Pump] > Component Information > Technical Service Bulletins > Coolant Pump - Bleed Hole Cleaning > Page 4049

[PREV PAGE] [NEXT PAGE]