Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


940 L4-2.3L SOHC VIN 88 B230F (1992)

Engine, Cooling and Exhaust > Cooling System > Engine - Coolant Temperature Sensor/Switch > Temperature Sensor (Gauge) > Component Information > Diagrams > Page 3797

Page 1
background image

Temperature Sensor (Gauge): Testing and Inspection

Temperature Gauge Sensor Fault Tracing

-

Check between the two poles of the connector.

-

Lower sensor into water until threads are covered.

NOTE:  Sensor and thermometer must not touch the bottom of the vessel. Always allow the temperature to stabilize before taking readings.

Temperature

Resistance

 60 °C (68 °F)

560 ohms

 90 °C (194 °F)

206 Ohms

 100 °C (212 °F)

153 Ohms

Engine, Cooling and Exhaust > Cooling System > Engine - Coolant Temperature Sensor/Switch > Temperature Sensor (Gauge) > Component Information > Diagrams > Page 3797

[PREV PAGE] [NEXT PAGE]