Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


940 L4-2.3L SOHC VIN 88 B230F (1992)

Engine, Cooling and Exhaust > Engine > Coolant Pump <--> [Water Pump] > Component Information > Fundamentals and Basics > Initial Preparations

Page 1
background image

Coolant Pump: Fundamentals and Basics
Initial Preparations

INITIAL PREPARATIONS

Disconnect Battery

When working near or around the cooling fan or drive belts, accidentally engaging the starter or cooling fan can result in serious personal
injury.

The negative battery terminal should be disconnected prior to commencing work and should not be reconnected until after the water pump is
installed and the engine is ready to restart.

Fender Covers

Fender covers will prevent damage to the vehicles finish while performing the job.

NOTE:  A fender cover folded over the radiator will prevent accidental damage to the radiator. The radiator can be easily damaged should
a wrench slip off of a bolt while working on the water pump.

Coolant Drip Pan

Pre-position a drip pan under the vehicle to prevent any incidental spills.

Engine, Cooling and Exhaust > Engine > Coolant Pump <--> [Water Pump] > Component Information > Fundamentals and Basics > Initial Preparations

[PREV PAGE] [NEXT PAGE]