Volvo Workshop Manuals
940 L4-2.3L SOHC VIN 88 B230F (1992)
Engine, Cooling and Exhaust > Engine > Tune-up and Engine Performance Checks > Valve Clearance > System Information > Specifications > Page 3539
Valve Washer (Shim) Measurement
Select adjustment washer of correct thickness:
Washers are available in thicknesses of 3.30-4.50 mm (0.13-0.18 in) at increments of 0.05 mm (0.002 in).
Only use new washers.
Use micrometer to measure thickness of old washer.
Valve Washer (Shim) Installation
Oil and install new washer:
Turn washer with marking pointing downwards.
Remove press tool 5022
Turn engine over a few times with starter motor.
Then check clearance again.
Adjust if necessary.
Valve Cover & Gasket
Install valve cover:
Use new gasket.
|[PREV PAGE] [NEXT PAGE]|