940 L4-2.3L SOHC VIN 88 B230F (1992)
Tail Lamp: Service and Repair
Tail Light Cluster Replacement (5 Door)
-
Disconnect battery ground lead.
-
Remove cover over spare wheel well.
-
Remove cover over sockets.
-
Undo the 3 light cluster retaining nuts.
-
Withdraw the tall light and release the leads at connector.
-
Reassemble in reverse order. Check fit and seal on body before tightening the nuts.
Refit the leads in the following order:from above: gray, black, green (blue-green), yellow (yellow-red) and red (brown-white).
Make sure that wires are not trapped between light cluster and body.