940 L4-2.3L SOHC VIN 88 B230F (1992)
9.
Place selector cable into pin #2.
Checking Pin 12
10.
Connect a voltmeter between ground and pin 12 at ECU connector.
a. Reading: approx. 12 volts
b. Reading: 0V when button is depressed
11.
If O.K., diagnostic socket is working correctly. See step 22.
12.
If the diagnostic socket fails the test, check wiring between ECU connector and diagnostic socket. If wiring is O.K., see next step.
Power Source At Diagnostic Socket
13.
Disconnect diagnostic socket connector.
14.
Connect voltmeter between blue wire and ground.
Reading: approx. 12 volts
15.
Turn ignition OFF.
