Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


940 L4-2.3L SOHC VIN 88 B230F (1992)

Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Fuel Delivery and Air Induction > Throttle Position Switch > Component Information > Technical Service Bulletins > Throttle Switch/Mechanism - Adjustment > Page 4853

Page 11
background image

Check that lever rests (arrow) against adjusting screw. If not, loosen link at lever.

Open throttle slightly by operating lever or pulley. Insert feeler gauge between lever and adjusting screw, and check as follows:

- With 0.45 mm gauge, click should not be heard from switch when throttle is closed.
- With 0.15 mm gauge, click should be heard from switch when throttle is closed.

If return click is not within above limits, loosen switch mounting screws and adjust as per item 1.3.

Check lever clearance
See item F.

Check that throttle switch "clicks" when 0.15 mm feeler gauge is inserted between adjusting screw and lever, even when engine is idling. Use test mode
2 in diagnostic system to detect click. Acknowledgment code 3-3-2 should be displayed when throttle switch is opened and closed.

Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Fuel Delivery and Air Induction > Throttle Position Switch > Component Information > Technical Service Bulletins > Throttle Switch/Mechanism - Adjustment > Page 4853

[PREV PAGE] [NEXT PAGE]