Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


940 L4-2.3L SOHC VIN 88 B230F (1992)

Powertrain Management > Tune-up and Engine Performance Checks > Valve Clearance > System Information > Specifications > Page 5044

Page 3
background image

Valve Washer (Shim) Measurement

Select adjustment washer of correct thickness:
-

Washers are available in thicknesses of 3.30-4.50 mm (0.13-0.18 in) at increments of 0.05 mm (0.002 in). 

-

Only use new washers.

-

Use micrometer to measure thickness of old washer.

Valve Washer (Shim) Installation

Oil and install new washer:
-

Turn washer with marking pointing downwards.

Remove press tool 5022

-

Turn engine over a few times with starter motor.

-

Then check clearance again.

-

Adjust if necessary.

Valve Cover & Gasket

REINSTALL:

Install valve cover:
-

Use new gasket.

Powertrain Management > Tune-up and Engine Performance Checks > Valve Clearance > System Information > Specifications > Page 5044

[PREV PAGE] [NEXT PAGE]