Volvo Workshop Manuals
940 L4-2.3L SOHC VIN 88 B230F (1992)
Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Wheel Speed Sensor > Component Information > Technical Service Bulletins > ABS Wheel Sensor - Installation Tool > Page 1434
Wheel Speed Sensor: Technical Service Bulletins
US and Canada
TP 31685/1 (ENGLISH); 02/91; 700-900 REAR AXLE; PG. 27.
REAR AXLE TOOTHED WHEEL/INDUCTIVE PICKUP CLEARANCE
Correct specifications for clearance between speedometer/ABS toothed wheel and inductive pickup at rear axle are as follows:
12-tooth (non-ABS, speedo only)
0.85 +/- 0.35 mm (0.0335 +/- 0.0138 in.)
96-tooth (early ABS, -->'88)
0.6 + 0.13/ - 0.25 mm
48-tooth (late ABS, '89-->)
0.6 + 0.2/ - 0.3 mm
Note the following:
Sensors mounted in aluminum differential covers have fixed clearance that is not adjustable. TP 31685/1, pg. 3 specifications are correct. TP 31685/1,
Please cut out the outlined text. Glue or paste it in position on page 27 of TP 31685/1.
Please correct all other referenced material.
|[PREV PAGE] [NEXT PAGE]|