Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


940 L4-2.3L SOHC VIN 88 B230F (1992)

Sensors and Switches > Sensors and Switches - Instrument Panel > Fuel Gauge Sender > Component Information > Testing and Inspection > Page 1846

Page 1
background image

Fuel Gauge Sender: Service and Repair

Fuel Level Sensor Replacement

-

Remove battery negative lead.

-

Remove draining hose on left side, 4-door.

-

Fold forward seat back, 5-door.

-

Remove carpet and covers in trunk

-

Unplug connectors.

-

Remove cover over tank gauge unit

-

Clean area around unit and hose connections.

-

Remove hoses from unit.

-

Remove gauge unit and gasket.

-

Remove clamps around filler pipe.

-

Remove electrical connector. Press out rubber grommet.

-

Withdraw lead to gauge unit.

NOTE:  If tank is more than half full, fuel must be drained (Sheet metal tanks).

-

Remove nut on gauge unit with special tool: P/N 999 54489.

-

Lift out gauge.

-

NOTE: Replace nut on tank neck or it may swell, causing nut to be difficult to refit and tank to leak.

Sensors and Switches > Sensors and Switches - Instrument Panel > Fuel Gauge Sender > Component Information > Testing and Inspection > Page 1846

[PREV PAGE] [NEXT PAGE]