Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


940 L4-2.3L SOHC VIN 88 B230F (1992)

Sensors and Switches > Sensors and Switches - Lighting and Horns > Backup Lamp Switch > Component Information > Service and Repair > Removal

Page 1
background image

Backup Lamp Switch: Service and Repair
Removal

1. Lower the rear end of the gearbox
2. Support the gearbox by means of a hoist and fixture P/N 5972.
3. Slacken the exhaust pipe joint slightly. Release the gearbox cross-member from the body.
4. Lower the rear end of the gearbox.

5. Blow clean the area around the switch.
6. Remove the reversing light switch.

A: For a switch without cables, use a socket.
B: For a switch with cables, disconnect the connector and remove the switch by means of socket P/N 5250. (This is a combined reversing light

switch/transmitter for 1st and 2nd gear.)

Sensors and Switches > Sensors and Switches - Lighting and Horns > Backup Lamp Switch > Component Information > Service and Repair > Removal

[PREV PAGE] [NEXT PAGE]