Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


940 L4-2.3L SOHC VIN 88 B230F (1992)

Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Throttle Position Switch > Component Information > Description and Operation > Bosch > Page 2252

Page 1
background image

Throttle Position Switch: Description and Operation
Bendix

Throttle Position Switch

FOR FUEL INJECTION ECU:

The ECU supplies a voltage (at two terminals) to the throttle switch. When the throttle valve is closed (idle position) or in the full load position,
the switch grounds the ECU, allowing the current to flow from one of the two terminals. This will indicate the throttle position to the ECU. The 
throttle position switch is located on the throttle housing. It has yellow identification markings to prevent confusion with other throttle switches. 

FOR IGNITION ECU:

When the throttle valve is closed (idle position) the switch grounds the ECU, allowing the current to flow from the terminal. This will indicate the
throttle position to the ignition ECU. The throttle position switch is located on the throttle housing. 

Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Throttle Position Switch > Component Information > Description and Operation > Bosch > Page 2252

[PREV PAGE] [NEXT PAGE]