Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


940 L4-2.3L SOHC VIN 88 B230F (1992)

Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Emission Control Systems > EGR Temperature Sensor > Component Information > Locations > Page 2297

Page 1
background image

EGR Temperature Sensor: Service and Repair

Fig. 166 E.G.R. TEMPERATURE SENDER

1.

Turn ignition OFF.

2.

Disconnect EGR temperature sensor connector.

3.

Remove sensor.

CAUTION:Sensor is extremely sensitive to shock and impact, handle with care.

4.

Install EGR temperature sensor and tighten to:

5 - 9.5 ft.lb (60 - 100 in.lbs / 7 -13 Nm).

5.

Reconnect connector.

Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Emission Control Systems > EGR Temperature Sensor > Component Information > Locations > Page 2297

[PREV PAGE] [NEXT PAGE]