940 L4-2.3L SOHC VIN 88 B230F (1992)
Neutral Safety Switch: Service and Repair
Neutral Safety Switch / Start Inhibitor Switch Removal and Installation.
NOTE: For additional information regarding the Removal and Installation of the Neutral Safety Switch / Start Inhibitor Switch, please refer to Vehicle
/Transmission and Drivetrain /Automatic Transmission/Transaxle /Shift Lever Housing / Service and Repair.
Remove the ashtray and the panel in the center console.
Remove the holder with the gear position symbols.
Remove the start inhibitor / reversing light switch.
-
Separate the connector. Lift out the start inhibitor / reversing light switch.
Fit the new start inhibitor / reversing light switch.
-
Put the connector together. Make sure that the stud on the gear selector lever enters the slot in the start inhibitor / reversing light switch. Don't
forget the prism (A).
Put the panel and the ashtray back.
