940 L4-2.3L SOHC VIN 88 B230F (1992)
Ignition Lock Cable: Technical Service Bulletins
A/T - Key Lock Cable Replacement
Model:
900
Group:
43
Number:
708
Title:
Key Lock Cable Replacement
940 1993 --> W/ Automatic Transmission
Market:
US and Canada
Date: August 1992
Reference: NONE
Key Lock Cable Replacement
1993 M/Y 940 series vehicles with automatic transmission will be equipped with a key lock function.
A latching segment is used to prevent movement of the gear selector lever from position P unless the ignition key is in position I or II. The key cannot be
turned to position 0 and removed unless the lever is in the P position.
The physical connection between the ignition switch and the gear lever mechanism consists of a cable. (see illustration)
An override function is provided to enable the lever to be shifted from position P if there is no power supply. The ignition key must be in position I or II,
and the override button and the release button on the gear lever must be pressed simultaneously.
WARNING:
Caution must be taken when working on SRS equipped cars.
Removal of cable
(A1)
Disconnect battery ground lead
(A2)
Remove: