940 L4-2.3L SOHC VIN 88 B230F (1992)
Install Spring
^
Pull the shock absorber piston rod out as far as possible.
^
Install spring on spring strut, bellows with guide sleeve, bump stop, rubber spacer, spring plate and the shaped washer with taper downward.
Locate New Axial Ball Bearing in Spring Plate
^
Ensure that the bearing seat is clean.
^
Locate axial bearing with the yellow half upwards.
^
Install mount, washer and nut.
^
Tighten nut but do not tighten completely.
^
Use socket 5036 and holder 5037.