940 L4-2.3L SOHC VIN 88 B230F (1992)
Compress the New Spring With Tool 5407
^
Place compressor tool 5607 opposite each other and with three free spring coils between the tool jaws.
^
Compress each side alternately.
^
Compress the spring until the length is approximately 275 mm (10.8 in) between ends.
Component Inspection
^
Check:
-
mount.
-
axial bearing.
-
rubber spacer.
-
bellows, etc. for wear and damage.
^
Replace as needed.
NOTE: The picture shows only parts for the 740 model, not the 760 or 780 models from 1988.
