volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

ABOUT US
Throttle Valve Cable (Kickdown Cable) <--> [Throttle Valve Cable/Linkage, A/T]|Service and Repair > < Shift Linkage, A/T|Adjustments

940 L4-2.3L SOHC VIN 88 B230F (1992)

Page 1
background image

Throttle Valve Cable (Kickdown Cable): Adjustments

Fig. 2  Kickdown Cable Adjustment

1.

Pull cable outward until slight resistance is felt, then while holding cable in this position, install cable clip .01-.04 inch from cable sheath end.

2.

Adjust cable sheath position so clip is pulled out approximately 1.98-2.07 inches when throttle pedal is completely depressed, Fig. 2.

Throttle Valve Cable (Kickdown Cable) <--> [Throttle Valve Cable/Linkage, A/T]|Service and Repair > < Shift Linkage, A/T|Adjustments