940 L4-2.3L SOHC VIN 88 B230F (1992)
Remove Relief Valve And Components
7. Remove all shims from assembly, then install new valve. Install the most recent version with new inner spring.
8. Re-assemble overdrive unit, then install overdrive unit into vehicle.
Hydraulic Pistons Replacement
1. Remove overdrive unit from vehicle.
2. Tool P/N 2709 must be modified if it will be used on a three-pin carrier. To modify the tool, drill out the two existing holes on the tool to 16 mm
(as shown in the illustration).
3. Remove gasket and pressure plate assembly.
