940 L4-2.3L SOHC VIN 88 B230F (1992)
5. Remove brake drum, springs. Lift out clutch, thrust bearing and sun gear assembly.
NOTE: Type P: Proceed to operation 7. Operation 6 only applies to Type J. Overdrive.
6. Remove planetary gear assembly. Replace planetary gear assembly if gears or carrier are damaged.
NOTE: Proceed to operation 9. Operations 7 to 8 only refer to Type P Overdrive.
7. Remove planetary gear carrier and thrust washer. If one-way clutch or planetary gear carrier is to be replaced prossed to step 8.
