940 L4-2.3L SOHC VIN 88 B230F (1992)
Disassembling rear housing. Type J Overdrives
18. Clamp overdrive rear housing in a vice protected by soft laws.
19. Remove lock ring and one-way clutch oil slinger.
NOTE: Turn one-way clutch in locking direction and make sure that outer ring does not slip on input shaft.
20. Remove one-way clutch. Use ring P/N 5210. Turn ring clockwise
21. Examine roller cage. Invert ring with one-way clutch in it. Check to see if roller cage is oval. If so, replace with new type, Volvo P/N 1 209726-7.
22. Disassemble one way clutch. Replace any damaged parts.
NOTE: Illustrations show an early version of one-way clutch.
