940 L4-2.3L SOHC VIN 88 B230F (1992)
Measure depthwise position of windshield with sliding calipers.
Measure combined thickness of windshield and PUR adhesive above the windshield frame.
Measure distance at each of four corners should be max. 12 mm.
Measure distance along top and bottom edges and along windshield pillars should be between 8 and 11 mm.
Note:
This will ensure proper fit of windshield to moulding.
Remove tape from pillars and windshield edges.
Reinstall:
-
trim
-
cover panel
-
grommets
-
wiper arms
Note:
Vehicles with dual bag SRS systems may be driven 3 hours after use of two component PUR adhesive.
