940 L4-2320cc 2.3L DOHC VIN 89 B234F FI (1991)
1. Replace all gaskets.
2. Replace all gaskets.
3. Replace complete pump.
4. Replace all gaskets.
5. Overhaul hose connection:
- clean off corrosion, if any
- replace hose clip, if necessary
- replace hose, if necessary
...............................................................................................................................................................................................................................................
Coolant pump, replacement
Drain coolant
Set heater control to max. heat.
Remove expansion tank cap.
Open cock on right-hand side of cylinder block. Fit hose to cock to collect coolant.
Disconnect bottom radiator hose.
Close drain cock and replace hose.
Remove:
- alternator drive belt
- radiator fan and pulley
Remove coolant pump
Remove all bolts, washers and nuts.
