940 L4-2320cc 2.3L DOHC VIN 89 B234F FI (1991)
Cylinder Head Gasket: Service and Repair
Cylinder Head Gasket, Replacement
Special tool: 5098
Battery Ground Lead
Disconnect battery earth lead
Drain coolant
Remove heat shield over exhaust manifold.
(Only the two bottom bolts on the plate need be removed.)
Remove expansion tank cap.
Drain coolant through cock on right-hand side of cylinder block. Fit tube to cock to facilitate collection of coolant.
Remove tube and close drain cock on completion of drainage.
Strip right-hand side of cylinder head
Unbolt exhaust pipe from bracket.
Remove manifold nuts.