940 SE L4-2320cc 2.3L SOHC Turbo VIN 87 B230FT (1991)
5. Jack up car. Remove air baffle between spoiler and radiator.
6. Disconnect condenser.
7. Dry connections internally. Plug all open ends.
8. Apply masking tape to chromed section of bumper to protect chrome.
Caution: Remove condenser by lifting very carefully straight up.
9. Measure quantity of oil remaining in original condenser. New condenser must be tilled with same quantity.
Installation
Refer to R 134A System if replacing condenser with new type with new connections.
10. Transfer foam rubber seals to new condenser.
11. Fill condenser with compressor oil.
NOTE: If original condenser contains no oil, fill new unit per specifications.