940 SE L4-2320cc 2.3L SOHC Turbo VIN 87 B230FT (1991)
Evaporator Core: Service and Repair
Evaporator Core Replacement
Removal
WARNING: Before commencing work, read and observe "Safety Precautions" when working on A/C systems.
See: Service Precautions/Technician Safety Information
CAUTION: Before commencing work, read and observe general information on repair and replacement of A/C "System Components".
See: Service Precautions/Vehicle Damage Warnings
NOTE: When replacing evaporator also become familiar with evaporator cleaning.
See: Evaporator Core Cleaning
1. Disconnect battery ground lead.
2. Drain system of refrigerant. For more information refer to "Drainage of A/C System. See: Service and Repair
3. Disconnect evaporator connections in engine compartment.
CAUTION: Plug connections immediately, otherwise air receiver/dryer may be damaged by moisture. Air receiver must be replaced if system
has been open for more than 10 minutes.
4. Remove:
-
panel under glove box
-
glove box.