940 SE L4-2320cc 2.3L SOHC Turbo VIN 87 B230FT (1991)
Carefully lift the cover so that it will not come in contact with the components on the circuit board.
Remove the E PROM cover.
Insert a small screwdriver (ESD-approved) in each slot on the cover and pry carefully.
When the cover is loose, lift it.
Mark the old E PROM with the "scrap" sticker provided in the kit (so that it will not be re-installed in error).
Locate the extractor over the prom to be removed, pressing the lever together until the prom pops up.