940 SE L4-2320cc 2.3L SOHC Turbo VIN 87 B230FT (1991)
10. Press joint onto drive (axle) shaft Use drift 2731 and universal puller as counterhold.
Install new circlip.
11. Remove protective paper from new gasket. Locate gasket in recess in joint
12. Pack joint and outer cover with grease
Use grease supplied with kit.
13. Press home cover
14. Press new grease into joint and bellows
15. Coat inner cover with sealing agent. Press home cover.
16. Place gaiter in position on cover and on drive (axle) shaft.
17. Install clips and tighten with pincers.